Influenţa unghiului de orientare a canelurilor asupra masei seminţelor distribuite la aparatele de distribuţie cu cilindru canelat

  • Andrei GHEORGHIŢA Universitatea Agrară de Stat din Moldova
  • Vladimir SERBIN Universitatea Agrară de Stat din Moldova

Abstract

The researches were conducted on fluted roller distributor of the seed drill SZ-3,6A. Three types of fluted rollers were tested, each having a different angle of orientation of the groove with respect to roller generatrix: -19, 0,and +19 degrees. The tests were performed with each roller at the followingparameters: revs 40, 50 and 60 min-1 and the active length of the groove 13, 26 and 39 mm. As a result of our investigations, it was demonstrated that groove orientation angle influences the mode of streaming of seeds, which pass from pulsatory flow to uniform flow with an unessential decrease of the distributed mass, even if volume of the groove increased. Terminal edge angle (equal to - 9 degrees) of mobile flap regulating the thickness of seed stream, influence the parabola formed by the groove orientation angle, moving the symmetry axis away from point zero. Response surface is more stable and uniform when the angle of orientation of the grooves is + 19 degrees


Key words: Seed drill; Seed distributor; Fluted roller; Distribution uniformity; Seeds; Mass.


Rezumat. Cercetările s-au efectuat pe aparatul de distribuţie al maşinii de semănat SZ-3,6A. În cadrul experimentului s-au utilizat trei tipuri de cilindri canelaţi cu unghiurile de orientare a canelurilor faţă de generatoare a cilindrului, în intervalul: – 19;0 şi +19 grade. S-au efectuat testări cu fiecare cilindru la următorii parametri: turaţiile 40; 50 şi 60 min-1; lungimea activă a canelurii 13;26 şi 39 mm. În rezultatul testărilor s-a demonstrat că unghiul de orientare a canelurii înfluenţează modul de scurgere a seminţelor, care trece din flux pulsatoriu în flux uniform cu o micşorare ne esenţială a masei distribuite, chiar dacă s-a mărit volumul canelurii. Unghiul muchiei terminale a clapetei pentru reglarea grosimii stratului de seminţe, egal cu -9º, influenţează asupra parabolei formată de unghiul de orientare a canelurii, deplasând de la punctul zero axa de simetrie. Suprafaţa de răspuns este mai stabilă şi mai uniformă în cazul în care unghiul de orientare a canelurilor este de +19º.


Keywords: Maşină de semănat; Aparat de distribuţie; Cilindru canelat; Uniformitate de distribuţie; Seminţe; Masă.

References

1. BOSOJ, E., 1978. Teoriâ, konstrukciâ i rasčet sel’skohozâjstvennyh mašin. Moskva: Mašinostroenie. 568 с
2. KRUTIKOV, N., 1951. Teoriâ, konstrukciâ i rasčet sel’skohozâjstvennyh mašin. Tom I, Moskva, Mašinostroenie. 580 c
3. SEMENOV, A., 1959. Zernovye seâlki. Kiev: Masgiz. 356 c
4. KARDASEVSKIJ, S., 1973. Vyseivaûsie ustrojstva posevnyh mašin. Moskva: Mašinostroenie. 176 c
Published
2017-05-22
How to Cite
GHEORGHIŢA, Andrei; SERBIN, Vladimir. Influenţa unghiului de orientare a canelurilor asupra masei seminţelor distribuite la aparatele de distribuţie cu cilindru canelat. Stiinta agricola, [S.l.], n. 1, p. 108-112, may 2017. ISSN 2587-3202. Available at: <https://sa.uasm.md/index.php?journal=sa&page=article&op=view&path%5B%5D=228>. Date accessed: 19 apr. 2024.
Section
Table of contents